top of page

Drones

DJI Matrice 30  Series

Matrice 30

The New All Weatherproof DJI Matrice 30 is Packed with a 48MP Zoom Camera, a Wide Panoramic Camera and a Laser Range Finder on a Fixed Hybrid 3-Sensor Payload. The DJI M30 Flies for Over 40 Minutes with Battery Hot Swap Ability and a FPV Camera Optimized for Low-Light Conditions.

  • A New Generation of Commercial Drones

  • IP 55 All Weatherproof

  • Fixed Hybrid 3-Sensors Payload

  • 1. Zoom Camera: 48MP 1/2" CMOS Sensor

  • 2. Wide Camera: 12MP 1/2" CMOS Sensor

  • 3. Laser Range Finder: 1.2 Km Range

  • 41 Min Max Flight-time

  • Smart Inspections and AI Spot Checks

  • Low-Light FPV Camera

  • 6 Directional Sensing and Positioning

  • The All New DJI RC Plus Enterprise Remote Controller

  • 4 Antenna OcuSync 3 Enterprise

  • Up to 8Km Transmission Range

  • Battery Hot Swap

  • DJI FlightHub2

  • DJI Pilot2

  • Payload SDK

Payloads

Zenmuse H30T

Zenumuse H30T

Introducing the Zenmuse H30 Series, a groundbreaking innovation in aerial imaging technology that redefines the boundaries of what's possible from above. Designed for all-weather, full-day operations, this multi-sensor flagship payload represents the pinnacle of integration and versatility.

Higher Integration：Zenmuse H30 Series integrates five major modules, a wide-angle camera, a zoom camera, an infrared thermal camera, a laser range finder, and an NIR auxiliary light. 

  • 1/1.3-inch CMOS, effective pixels 48MP

  • Equivalent focal length: 24mm

  • Provides better auxiliary illumination for zoom camera

  • NIR band, wavelength of 850nm

  • Provides better auxiliary illumination for zoom camera

  • 34x optical zoom, 400x max digital zoom

  • Measurement range: 3-3000m (~9842 ft)

  • Photo resolution: 1280x1024

  • Equivalent focal length: 52mm

Zenmuse H30

Zenumuse H30

The DJI Zenmuse H30 Series (H30 / H30T) is a flagship multi-sensor payload combining wide-angle, zoom, laser rangefinding, and NIR (and thermal in H30T) modules. Designed for versatile aerial imaging and inspections, it is fully compatible with the Matrice 350 RTK, offering all-weather, high-resolution performance for critical operations.

  • NIR band, wavelength of 850nm, invisible to the human eye

  • 1/1.8-inch CMOS, effective pixels 40MP

  • Measurement range: 3-3000m (~9842 ft)

  • Full-color night vision with noise reduction

  • Video pre-recording

  • 1280x1024 resolution

  • Smart Capture for better imaging

  • Electronic Dehazing for higher clarity

  • IP54 IP rating

  • Operating temperature: -20℃ to 50℃ (-68°F to 122°F)

Zenmus P1

Zenumuse P1

The DJI Zenmuse P1 is a next-generation photogrammetry payload, featuring a full-frame 45MP sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal. Designed for large-scale aerial surveying and mapping, it delivers survey-grade accuracy and unmatched efficiency when paired with the Matrice 350 RTK, making it an essential tool for professional geospatial and engineering applications.

  • Efficiency through Flexible Full-frame Photogrammetry

  • 45 MP Full-frame Sensor 

  • 4.4μm Pixel Size

  • Multiple Fixed-Focus Lens 24/35/50 mm

  • 60 fps Video Capture

  • Global Mechanical Shutter

  • 3-axis Stabilized Gimbal

  • Smart Oblique Capture

  • IP4X Ingress Protection Level

  • TimeSync 2.0

Zenmuse L2
Drone & Payloads Icon

Zenumuse L2

A new age of 3D data gathering has begun with the DJI Zenmuse L2. AThe apex of LiDAR technology is the DJI Zenmuse L2. It produces precise 3D scans thanks to its 4/3 CMOS RGB camera, Livox LiDAR module, and precision IMU. It is the perfect tool for surveying, mapping, and other tasks because it can through dense vegetation and find things at a distance of 250 meters. Its quick startup time and cutting-edge features make it a must for professionals.  Additionally, it offers a complete solution for 3D data collecting and high-accuracy post-processing when combined  with DJI Terra.

  • Point range of 240,000 point clouds

  • Point cloud LiveView

  • Operating area – 2.5 km2

  • Support 5 returns

  • No need of IMU warm up before take off

  • Laser Range support upto 450m

  • Mechanical shutter life – 200,000 times

  • Repetitive and non-repetitive scanning

  • A high-accudacy IMU system

  • RGB mapping camera (4/3 CMOS, 20 MP)

  • One click processing on DJI Terra

D-RTK 3

D-RTK 3

Introducing the DJI D-RTK 3 Multifunctional Station a versatile solution for high-precision positioning and extended operational range in drone applications.

  • Relay Station Mode [2] : Break Through Limitations

  • Rover Station Mode: Flexible and Efficient

  • Standalone Precise Point Positioning (PPP)

  • Network High-Precision Calibration

Acessories

Zenmuse L2

Zenumuse L2

The DJI Zenmuse L2 is a high-performance LiDAR payload, integrating a Livox LiDAR module, RGB mapping camera, and precision IMU on a 3-axis stabilized gimbal. Fully compatible with the Matrice 350 RTK, it delivers survey-grade accuracy and fast startup—ideal for 3D terrain mapping in vegetated or complex environments.

  • Point range of 240,000 point clouds

  • Point Cloud LiveView

  • Operating are - 2.5 km2

  • Support 5 returns

  • No need of IMU warm up before take off

  • Laser range support up to 450m

  • Mechanical shutter life - 200,000 times

  • Repetitive and non-repetitive scanning

  • A high-accudacy IMU system

  • RGB mapping camera (4/3 CMOS, 20 MP)

  • One click processing on DJI Terra

Zenmuse S1

Zenumuse V1

Zenmuse V1 is DJI’s first drone-mounted directional speaker system designed for clear audio transmission during aerial operations. It supports directional recording, environmental noise cancelation, and clear voice broadcasting through various modes.

  • Multiple Broadcast Modes

  • Powerful Sound

  • Clear, Directional Recording

  • Precise Control, Targeted Broadcast

  • Reliable and Intuitive

  • Flexible Mounting, Lightweight Build

  • Ideal for use in emergency communication, crowd guidance, and public safety missions.

  • ​Integrated with RC Plus for precise directional control and consistent clarity.

Zenmuse S1

Zenumuse S1

The DJI Zenmuse S1 is the first drone-mounted spotlight payload, powered by LEP (Laser Excited Phosphor) technology for powerful long-range illumination. Fully compatible with the Matrice 350 RTK, it offers four lighting modes designed for search and rescue, inspection, and security missions, combining energy efficiency with reliable dual-light performance.

  • Multiple Lighting Modes

  • Brightness Meets Energy Efficiency

  • Reliable and Intuitive

  • Durable, Dual-Light Design

  • Low Beam Mode: Wide-angle coverage for close-range search tasks.

  • High Beam Mode: Focused, high-intensity light for long-distance visibility.

HoverMap

Hovermap

Hovermap is Emesent’s cutting-edge LiDAR payload for drones and mobile platforms, delivering survey-grade 3D mapping in GPS-denied or hazardous environments. Designed for versatility, it supports autonomous navigation, real-time point cloud visualization, and flexible deployment on drones, vehicles, or handheld.

  • High-Resolution LiDAR: Generates detailed, survey-grade 3D point clouds.

  • Autonomous Navigation: SLAM-based autonomy for GPS-denied environments.

  • Versatile Deployment: Use on drones, vehicles, backpacks, or handheld.

  • Real-Time Data: Instant 3D point cloud visualization.

  • Rugged Design: Reliable in mining, forestry, construction, and inspection.

Software

DJI Modify

DJI Modify

DJI Modify is DJI’s intelligent 3D model editing software, offering a streamlined interface for efficient aerial surveying, modeling, and editing, enhancing operational workflows across various sectors

DJI FlightHub2 is an all-in-one cloud-based drone operations management platform that provides comprehensive, real-time situational awareness for drone operations, including mission planning, fleet supervision, and data management from a secure cloud environment.

Flighthub 2

FlightHub 2
DJI Terra

DJI Terra 2

Capture, analyze and visualize your environment with DJI Terra – an easy to use mapping software developed to help industry professionals transform real-world scenarios into digital assets.

Enhance your drone operations with the DJI Ground Station Pro (DJI GS Pro), an iPad app. Conduct automated flight missions, manage flight data on the cloud, and collaborate across projects to efficiently run your drone program.

Ground Station Pro

Ground Station Pro
DJI Flight Simulator

Embrace drone technology as an integral part of work with the DJI Flight Simulator, a professional pilot training software using DJI’s leading flight control technology to recreate the natural flying experience.

​DJI Flight Simulator

bottom of page